Disconnect power and water when leakage reaches electrical areas. Identify whether the leak begins during filling, circulation, or draining.
Samsung uses LC, LC1, LE, LE1, and related displays for a water-level or leakage condition on supported washers. Look for moisture first, inspect visible supply and drain hoses, and run an empty no-additive test to identify excess detergent foam.
Newer Bosch dishwasher manuals use the E:30-00 display when the water-protection system is activated. Bosch's model documentation instructs the user to turn off the water tap and call Customer Service. This page is scoped to that newer E:30-00 display rather than treating it as a duplicate spelling of E15.
Bosch's US support defines E15 as the safety switch detecting water in the dishwasher base, which activates the leakage-protection system. The correct user response is to stop the water inflow and contact Bosch support rather than repeatedly resetting or tilting the appliance.
The E23 / F23 display on many Bosch washing machines indicates that AquaStop or leak protection is active. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AE display on many LG dishwashers indicates that the leak sensor detected water in the base. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AE1 display on many LG dishwashers indicates that the base leak sensor remains active. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E1 display on many LG dishwashers indicates that water leakage or a drain installation issue was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AE display on many LG washing machines indicates that water was detected where it should not be. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E1 display on many LG washing machines indicates that a leak or water in the base was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LC / LE display on many Samsung dishwashers indicates that the leak sensor detected water in the base. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LC1 display on many Samsung dishwashers indicates that water was detected in the dishwasher base. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LC1 display on many Samsung washing machines indicates that water was detected in the washer base. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Low refrigerant from a leak, compressor-control issues, condenser airflow, blend-door faults, or high ambient load can reduce cooling.
A door-seal issue, loose hose, excess foam, overfilling, or an internal pump and sump leak can put water under a dishwasher.
A loose hose connection, overflowing detergent, a blocked drain path, a damaged door seal, or an internal hose or pump leak can produce water under a washer.