Match the symptom, then work through the safe checks.
1. What best matches what you observe?
2. Complete only the checks that are safe for you.
Show stop conditions
- Mechanism would need forcing
- Grinding or overheating occurs
- Internal access is required
Likely causes
- Actuator cannot reach its expected position
- Foreign object or jam prevents movement
- Position feedback is abnormal
- Actuator or control needs service
Quick checks, in order
Cancel and restart once
A clean restart may let the mechanism re-home.
Remove only accessible debris
Do not force internal mechanisms.
Listen for clicking or humming
Repeated attempts may indicate a jam.
Arrange model-specific service
Internal actuators and sensors require access.
What happens when E26 appears?
The mechanism may be jammed.
Sensor, wiring, or feedback is likely.
Wear, alignment, or a weak actuator may be involved.
Stop and get qualified help when
- Mechanism would need forcing
- Grinding or overheating occurs
- Internal access is required
Official support and model manuals
Use the full model number from the rating label. The manufacturer manual is the deciding reference when codes differ by region or product family.
Frequently asked questions
What does E26 mean on a Bosch dishwasher?
On many model families, E26 indicates that the water switch or flow control is abnormal. Confirm the exact model and region because the same display can be used differently.
Can I clear E26 by unplugging the dishwasher?
A short power reset may clear a temporary state, but it will not fix a blocked hose, leak, failed sensor, motor, heater, or wiring fault. Stop if the code returns.
Should I replace a part based only on the code?
No. A code identifies a system or condition, not always the failed component. Complete safe external checks and use the model-specific manual or qualified service.