Washers, dishwashers, refrigerators, dryers, and more.
The 4C / 4E display on many Samsung washing machines indicates that water is not entering correctly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Samsung groups 4C2 with hot/cold supply errors such as 4E2, CE, 14C2, and nF1. On supported models the cold inlet is receiving water that is too hot, most commonly because the hot and cold supply hoses are connected to the wrong inlets.
Samsung uses 5C / 5E for a drainage problem on supported washing machines. The first checks are the drain hose, its installation, and the user-accessible debris or pump filter where the model provides one.
The UE / Ub display on many Samsung washing machines indicates that the load is unbalanced for spinning. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Samsung uses dE / dC on supported washing machines when the door or lid is open, obstructed, overloaded, or cannot be confirmed as securely closed.
The dC1 display on many Samsung washing machines indicates that the main door lock signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Samsung specifically defines dC3 (and ddC) as an Add Door error on washer models equipped with that small secondary door. The control cannot confirm that the Add Door is closed and locked, so troubleshooting should stay focused on the Add Door opening, latch, trapped items, and visible damage rather than the main washer door.
Samsung uses LC, LC1, LE, LE1, and related displays for a water-level or leakage condition on supported washers. Look for moisture first, inspect visible supply and drain hoses, and run an empty no-additive test to identify excess detergent foam.
The LC1 display on many Samsung washing machines indicates that water was detected in the washer base. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The OC / OE display on many Samsung washing machines indicates that the washer detected an overfill. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Samsung 5d is a display variant of Sd or SUd on supported washers and means excessive suds were detected. The washer normally pauses and extends rinsing so the foam can dissipate, then continues automatically.
The HC / HE display on many Samsung washing machines indicates that the water-heating system is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
On supported Samsung FlexWash and washer-dryer combo families, HC2 points to the drying-heater system rather than the normal wash-water heater. Samsung's FlexWash guidance says to power-cycle once and seek service if HC2 returns.
The 3C / 3E display on many Samsung washing machines indicates that the motor or motor feedback is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 8C / 8E display on many Samsung washing machines indicates that the vibration sensor signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AC / AE display on many Samsung washing machines indicates that the control boards are not communicating. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AC6 display on many Samsung washing machines indicates that communication with the inverter is interrupted. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The tC / tE display on many Samsung washing machines indicates that the temperature sensor signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 1C / 1E display on many Samsung washing machines indicates that the water-level sensor signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The bC / bE display on many Samsung washing machines indicates that a control-panel button appears stuck. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Samsung groups 9C1 with washer voltage errors. On supported Active DualWash models Samsung specifically describes 9C1 as an over-voltage/electronic-control condition, so the first checks are the incoming power supply and whether the washer is on a proper dedicated circuit.
Samsung identifies 9C2 as a washer voltage error and, on supported Active DualWash models, specifically as low voltage. The useful first checks are the plug, wall supply, and whether the washer is being fed through an unsuitable extension or overloaded circuit.
The UC display on many Samsung washing machines indicates that the power supply voltage is unstable. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Samsung defines PC (also PE on some models) as a clutch-position error: the washer cannot determine the clutch's position. This is distinct from PC1, where a clutch position was detected but the Hall-sensor signal is then abnormal.
Samsung defines PC1 (also PE1 on some models) as an abnormal clutch Hall-sensor signal after the clutch position has already been detected. That makes PC1 a feedback-signal fault rather than the basic 'position cannot be detected' PC condition.
The ddC display on many Samsung washing machines indicates that the AddWash door was opened without pausing. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The Hot display on many Samsung washing machines indicates that the drum is still too hot to unlock safely. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The A0 display on many Samsung washing machines indicates that the washer is in a test-related mode. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The nF display on many Samsung washing machines indicates that the washer did not fill with water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The nd display on many Samsung washing machines indicates that the washer did not drain. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Samsung includes FL in its normal washer door-error group, meaning the main door is not detected as closed and locked. This differs from dC3/ddC, which Samsung reserves for the Add Door on models that have the smaller secondary opening.
The LO display on many Samsung washing machines indicates that the door failed to unlock. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E2 display on many Samsung washing machines indicates that a control-panel key is stuck. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Samsung currently groups 2E with its washer voltage-error family. The code means the washer detected an irregularity in the electrical current or supply, so the useful first checks are the power source, dedicated circuit, extension-cord use, and whether a power interruption or breaker event occurred.
Samsung lists SF, along with 5F and SF1/SF2/SF3 variants, as a washer system error. Unlike 2E, which Samsung places in the voltage-error family, SF does not have a normal external plumbing or load-balancing fix; Samsung's user-level path is a brief power reset followed by service if the error returns.
Samsung groups Hr with washing-machine heater errors, and older model-specific Samsung support describes Hr as a heater-relay operation fault. This is a wash-heating/control problem, not the washer-dryer HC2 drying-heater condition.
The 4C / 4E display on many Samsung dishwashers indicates that the dishwasher is not receiving enough water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 5C / 5E display on many Samsung dishwashers indicates that the dishwasher cannot drain correctly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LC / LE display on many Samsung dishwashers indicates that the leak sensor detected water in the base. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The OC / OE display on many Samsung dishwashers indicates that the dishwasher detected too much water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The HC / HE display on many Samsung dishwashers indicates that the water temperature or heater is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 3C display on many Samsung dishwashers indicates that the wash pump is not operating as expected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The PC display on many Samsung dishwashers indicates that the zone-wash diverter position is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 7E display on many Samsung dishwashers indicates that the WaterWall reflector cannot move correctly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The bE / 6E display on many Samsung dishwashers indicates that a control-panel button is held or stuck. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The CE display on many Samsung dishwashers indicates that the control modules are not communicating. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The PE display on many Samsung dishwashers indicates that the half-load or zone-wash connection is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The tE display on many Samsung dishwashers indicates that the temperature sensor signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 9E display on many Samsung dishwashers indicates that the dishwasher detected an insufficient water level. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 1E display on many Samsung dishwashers indicates that the filter or water-level path needs attention. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The HC2 display on many Samsung dishwashers indicates that the drying heater temperature is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LC1 display on many Samsung dishwashers indicates that water was detected in the dishwasher base. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The bC2 display on many Samsung dishwashers indicates that a button has been pressed continuously. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The dC display on many Samsung dishwashers indicates that the dishwasher door is not latched. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AP display on many Samsung dishwashers indicates that the dishwasher is in Wi-Fi setup mode. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The PC1 display on many Samsung dishwashers indicates that the diverter position cannot be confirmed. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The IE display on many LG washing machines indicates that the washer is not filling with enough water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The OE display on many LG washing machines indicates that the washer cannot drain in time. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The UE display on many LG washing machines indicates that the load remains unbalanced. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The dE display on many LG washing machines indicates that the door is open or not locking. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The dE1 display on many LG washing machines indicates that the door-lock switch signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The dE2 display on many LG washing machines indicates that the door could not lock or unlock. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The CL display on many LG washing machines indicates that control lock is enabled. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LE display on many LG washing machines indicates that the motor is locked or overloaded. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The CE display on many LG washing machines indicates that the motor circuit detected excessive current. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The FE display on many LG washing machines indicates that the washer detected an overfill. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The PE display on many LG washing machines indicates that the water-level pressure sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The tE display on many LG washing machines indicates that the water-temperature sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The PF display on many LG washing machines indicates that power was interrupted during the cycle. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AE display on many LG washing machines indicates that water was detected where it should not be. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E1 display on many LG washing machines indicates that a leak or water in the base was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E6 display on many LG washing machines indicates that the clutch or motor is prevented from moving. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The SE display on many LG washing machines indicates that the motor speed sensor signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
LG defines FF as Freeze Failure or freeze detection. Prolonged cold can freeze water in the washer, inlet hose, drain hose, faucet, tub, or pump path, preventing the machine from filling, draining, or starting.
The tcL display on many LG washing machines indicates that the tub-clean reminder is active. Codes can vary by model, so match the full model number to the official manual before ordering parts.
LG states that Cd is not a failure code on supported washer-dryer combo units. It means the appliance is in cool-down mode after drying and may tumble the load without heat to reduce wrinkles until you press a permitted button or the routine ends.
The Sud display on many LG washing machines indicates that excess detergent suds were detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
LG identifies dHE as a temporary dry-function error on supported washer-dryer combo units. Power the appliance off, isolate it at the plug or breaker for about ten seconds, restore power, and retry once; repeated dHE requires model-specific service.
The HE display on many LG washing machines indicates that the water-heating system is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The dL display on many LG washing machines indicates that the door-lock mechanism is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The Eb display on many LG washing machines indicates that the clutch or drive signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The vS display on many LG washing machines indicates that the vibration sensor signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LE1 display on many LG washing machines indicates that the motor or drive system is overloaded. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LE2 display on many LG washing machines indicates that the motor cannot complete rotation. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The IE display on many LG dishwashers indicates that the dishwasher is not filling with enough water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The OE display on many LG dishwashers indicates that the dishwasher cannot drain correctly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AE display on many LG dishwashers indicates that the leak sensor detected water in the base. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E1 display on many LG dishwashers indicates that water leakage or a drain installation issue was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LE display on many LG dishwashers indicates that the wash motor is locked. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The HE display on many LG dishwashers indicates that the heater circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The tE display on many LG dishwashers indicates that the temperature sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The PF display on many LG dishwashers indicates that power was interrupted during operation. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The CL display on many LG dishwashers indicates that control lock is enabled. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The bE display on many LG dishwashers indicates that the unit may be unlevel or over-sudsing. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The FE display on many LG dishwashers indicates that the dishwasher detected too much water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The nE display on many LG dishwashers indicates that the diverter motor position is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The CE display on many LG dishwashers indicates that the motor circuit detected excessive current. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The Cd display on many LG dishwashers indicates that the dishwasher is in a cool-dry phase. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The Cr display on many LG dishwashers indicates that the dishwasher is running a test mode. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The dE display on many LG dishwashers indicates that the door is not fully latched. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The nE1 display on many LG dishwashers indicates that the diverter motor cannot confirm position. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The nE2 display on many LG dishwashers indicates that the diverter feedback is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The HE1 display on many LG dishwashers indicates that the heater temperature is outside range. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The AE1 display on many LG dishwashers indicates that the base leak sensor remains active. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Bosch defines dishwasher E01 as a heat-pump motor circuit fault at the main control board. It is not the same as E02: Bosch assigns E02 to a main-control-board relay fault.
Bosch defines dishwasher E02 as a main control board relay fault/error. Unlike E01, Bosch does not identify E02 as the heat-pump motor circuit; the fault domain is the board's relay/control switching.
The E03 display on many Bosch dishwashers indicates that an auxiliary control circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E04 display on many Bosch dishwashers indicates that a heating-related control fault was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E05 display on many Bosch dishwashers indicates that an internal switching fault was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E06 display on many Bosch dishwashers indicates that the door sensor is not reporting correctly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E07 display on many Bosch dishwashers indicates that the drying fan is not operating correctly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E08 display on many Bosch dishwashers indicates that the water level is too low for heating. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E09 display on many Bosch dishwashers indicates that the heating element is not operating. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E10 display on many Bosch dishwashers indicates that the heating or drying system may be scaled. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E11 display on many Bosch dishwashers indicates that the temperature sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E12 display on many Bosch dishwashers indicates that the heating system may be restricted by limescale. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E14 display on many Bosch dishwashers indicates that the flow meter signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Bosch's US support defines E15 as the safety switch detecting water in the dishwasher base, which activates the leakage-protection system. The correct user response is to stop the water inflow and contact Bosch support rather than repeatedly resetting or tilting the appliance.
The E16 display on many Bosch dishwashers indicates that uncontrolled water entry was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E17 display on many Bosch dishwashers indicates that the incoming water flow is too high. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E18 display on many Bosch dishwashers indicates that the dishwasher is not receiving enough water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E19 display on many Bosch dishwashers indicates that an internal valve circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Bosch dishwasher E20 indicates an internal heater fault in the heat-pump assembly on supported models. Bosch recommends a brief power reset and service if the code returns.
Bosch dishwasher E21 means the heat pump is blocked on supported models. This is distinct from E20, which Bosch defines as an internal heat-pump heater fault.
The E22 display on many Bosch dishwashers indicates that the filter area is blocked. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E23 display on many Bosch dishwashers indicates that the drain-pump circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Bosch dishwasher E24 is primarily a waste-water drainage-path fault. Bosch documentation points to a kinked or blocked drain hose, a sealed/blocked siphon or air-gap connection, and on some models a loose pump cover as the main user-checkable causes.
Bosch dishwasher E25 specifically indicates that the drain pump is blocked or that the drain-pump cover is loose or missing on supported models. That makes E25 more pump-specific than the broader E24 drain-path condition.
The E26 display on many Bosch dishwashers indicates that the water switch or flow control is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E27 display on many Bosch dishwashers indicates that the incoming voltage is too low. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E28 display on many Bosch dishwashers indicates that the turbidity sensor signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Newer Bosch dishwasher manuals use the E:30-00 display when the water-protection system is activated. Bosch's model documentation instructs the user to turn off the water tap and call Customer Service. This page is scoped to that newer E:30-00 display rather than treating it as a duplicate spelling of E15.
Bosch support lists E31 / F31 for dishwasher model families in some regions. On the supported BSH platform it is a drying-system fault that can leave the machine operating without normal heating or drying. Do not confuse E31 / F31 with E31-00 / E3100, which is a different water-protection code.
The E32 display on many Bosch dishwashers indicates that the water-inlet control needs checking. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E34 display on many Bosch dishwashers indicates that the water flow-control system is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
E90 is not included in Bosch's standard US dishwasher error-code list. Do not copy the meaning from a Bosch dryer or another appliance. Record the complete dishwasher E-Nr, confirm the display, and use the model-specific manual or Bosch support.
Bosch washer E16 / F16 means the door is open or the control cannot confirm that it is properly closed. Bosch's user-level guidance is to close the door correctly and contact service if the code remains.
Bosch groups F29 with E17 and F17 on supported washers. It indicates that the water-supply filters or AquaStop hose may be restricted, or that household water pressure is too low for the washer to fill correctly.
The E18 / F18 display on many Bosch washing machines indicates that the washer cannot drain in time. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E19 / F19 display on many Bosch washing machines indicates that the water is taking too long to heat. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E20 / F20 display on many Bosch washing machines indicates that unexpected heating was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E23 / F23 display on many Bosch washing machines indicates that AquaStop or leak protection is active. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E25 / F25 display on many Bosch washing machines indicates that the turbidity sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E26 / F26 display on many Bosch washing machines indicates that the pressure sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Bosch washer E27 / F27 indicates a pressure-sensor fault on supported models. Bosch states that this fault is not a normal user repair and recommends arranging service.
The E29 / F29 display on many Bosch washing machines indicates that water is not entering correctly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Bosch E32 or F32 means the washer detected a load imbalance. The machine may slow or skip the spin cycle and make several distribution attempts, which can extend the program without indicating a failed part.
Bosch E:36 -10 points to a drainage-path problem such as a blocked or kinked outlet hose, an incorrectly installed hose, a blocked drain pump, or a pump cap that is not fully seated. E:36 -25 or -26 specifically points to a blocked drain pump.
The E57 / F57 display on many Bosch washing machines indicates that the motor inverter is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E58 / F58 display on many Bosch washing machines indicates that the motor is not rotating correctly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E67 / F67 display on many Bosch washing machines indicates that the control module configuration is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F21 display on many Bosch washing machines indicates that the motor cannot rotate. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F43 display on many Bosch washing machines indicates that the motor is mechanically blocked. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F44 display on many Bosch washing machines indicates that the motor direction control is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F59 display on many Bosch washing machines indicates that the imbalance sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F60 display on many Bosch washing machines indicates that the water-flow sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F61 display on many Bosch washing machines indicates that the door safety circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F63 display on many Bosch washing machines indicates that the control entered a protection state. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E80 display on many Bosch washing machines indicates that the control electronics detected a fault. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E90 display on many Bosch washing machines indicates that the internal modules are not communicating. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Whirlpool F5E2 indicates that the washer cannot confirm the door or lid lock has engaged on supported models, often because the latch area is obstructed or the lock mechanism is not completing its movement.
Whirlpool F5E3 is a door/lid lock-state fault whose exact meaning depends on washer platform; some Whirlpool guidance treats it as a door-lock problem, while top-load guidance can describe a lid that will not unlock.
Whirlpool F5E1 is a door-switch or lid-switch state fault on supported washer families: the control is not seeing the expected closed-door signal even though the door may appear shut.
The F8E1 display on many Whirlpool washing machines indicates that the washer is not receiving enough water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F9E1 display on many Whirlpool washing machines indicates that the washer is taking too long to drain. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The rL code on supported Whirlpool front-load washers means the machine detected clothing or another item in the drum after the Clean Washer cycle was selected. Empty the drum completely and restart that cleaning cycle.
The F0E2 display on many Whirlpool washing machines indicates that excess suds were detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F0E3 display on many Whirlpool washing machines indicates that the load is too large. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F1E1 display on many Whirlpool washing machines indicates that the main control detected a fault. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F1E2 display on many Whirlpool washing machines indicates that the motor-control electronics detected a fault. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F2E1 display on many Whirlpool washing machines indicates that a control-panel key is stuck. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F3E1 display on many Whirlpool washing machines indicates that the pressure sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F3E2 display on many Whirlpool washing machines indicates that the water-temperature sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F4E1 display on many Whirlpool washing machines indicates that the wash-water heater is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F4E2 display on many Whirlpool washing machines indicates that the heater control circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F5E4 display on many Whirlpool washing machines indicates that the door was not opened between cycles. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F6E1 display on many Whirlpool washing machines indicates that the main and motor controls are not communicating. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F7E1 display on many Whirlpool washing machines indicates that the motor cannot reach expected speed. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F7E5 display on many Whirlpool washing machines indicates that the shifter position cannot be confirmed. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F7E6 display on many Whirlpool washing machines indicates that the motor cannot drive the basket. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F8E3 display on many Whirlpool washing machines indicates that the washer detected an overflow. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Whirlpool documents F8E5 on supported Laundry Tower washer sections as a reversed water-supply condition. The first checks are installation-specific: verify hot-to-hot and cold-to-cold connections, then reset the control for five minutes.
The F8E6 display on many Whirlpool washing machines indicates that water is entering in an unsafe cycle state. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F9E2 display on many Whirlpool washing machines indicates that the drain-pump drive is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F9E3 display on many Whirlpool washing machines indicates that the drain system is too slow. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LOC display on many Whirlpool washing machines indicates that control lock is enabled. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The Int display on many Whirlpool washing machines indicates that the cycle was interrupted. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The rL display on many Whirlpool washing machines indicates that a load was detected during cleaning. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The Sd / SUD display on many Whirlpool washing machines indicates that excess suds are slowing operation. Codes can vary by model, so match the full model number to the official manual before ordering parts.
On supported Whirlpool top-load washers, HC is an end-of-cycle installation warning that the hot and cold inlet hoses are reversed. Whirlpool tells users to shut off the water, swap the connections, and run another cycle to verify the correction.
The LF display on many Whirlpool washing machines indicates that the washer is taking too long to fill. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The Ld display on many Whirlpool washing machines indicates that the washer is taking too long to drain. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The oL display on many Whirlpool washing machines indicates that the washer is overloaded. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The uL display on many Whirlpool washing machines indicates that the load is unbalanced. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The dL display on many Whirlpool washing machines indicates that the door or lid cannot lock. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The dU display on many Whirlpool washing machines indicates that the door or lid cannot unlock. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C1 display on many Whirlpool washing machines indicates that water flow is too low. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F1E1 display on many Whirlpool dishwashers indicates that the main control detected a fault. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F1E2 display on many Whirlpool dishwashers indicates that the control memory is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F2E1 display on many Whirlpool dishwashers indicates that a control-panel key is stuck. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F3E1 display on many Whirlpool dishwashers indicates that the temperature sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F3E2 display on many Whirlpool dishwashers indicates that the soil sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F4E1 display on many Whirlpool dishwashers indicates that the wash-motor circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F4E3 display on many Whirlpool dishwashers indicates that the wash motor is not running. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Whirlpool service documentation associates dishwasher F5E1 with a door-switch problem. The important distinction from F5E2 is that F5E1 concerns the control not seeing the expected door-switch state during operation, while F5E2 is tied to the control expecting the door to have been opened between cycles.
Whirlpool dishwasher service documentation associates F5E2 with the control expecting a door-open event between cycles but not detecting one. Typical context includes starting a new cycle without the door having been opened since the previous cycle or a door-switch contact that remains stuck closed.
The F6E1 display on many Whirlpool dishwashers indicates that the dishwasher is not detecting water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F6E2 display on many Whirlpool dishwashers indicates that the inlet-valve circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F6E3 display on many Whirlpool dishwashers indicates that suds or air affect water-level sensing. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F6E4 display on many Whirlpool dishwashers indicates that the overfill float is raised. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F7E1 display on many Whirlpool dishwashers indicates that the water did not heat as expected. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F7E2 display on many Whirlpool dishwashers indicates that the heater appears to remain on. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F8E1 display on many Whirlpool dishwashers indicates that the dishwasher is draining too slowly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The F8E2 display on many Whirlpool dishwashers indicates that the drain-pump circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
Whirlpool defines dishwasher F9E1 as a Long Drain condition: the machine is not removing water within the expected time. Whirlpool's user-level checks focus first on the filter, drain hose, disposer connection, air gap, installation, and excessive suds rather than assuming the drain motor itself has failed.
Whirlpool defines dishwasher F9E2 as a Drain Motor Error. External restrictions still need to be ruled out first, but unlike the F9E1 long-drain code, a returning F9E2 specifically points the diagnostic path toward the drain-motor system after the disposer, hose, and installation checks are cleared.
The F9E3 display on many Whirlpool dishwashers indicates that the diverter feedback is missing. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The FAE1 display on many Whirlpool dishwashers indicates that the detergent dispenser is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The FAE2 display on many Whirlpool dishwashers indicates that the vent actuator is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The H2O display on many Whirlpool dishwashers indicates that the dishwasher is not receiving enough water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 2-1 display on many Whirlpool dishwashers indicates that a keypad button is stuck. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 4-3 display on many Whirlpool dishwashers indicates that the wash motor is not running. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 6-1 display on many Whirlpool dishwashers indicates that the dishwasher is not detecting water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 6-4 display on many Whirlpool dishwashers indicates that the overfill float is raised. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 7-1 display on many Whirlpool dishwashers indicates that the water did not heat. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 8-1 display on many Whirlpool dishwashers indicates that the dishwasher is draining too slowly. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 9-1 display on many Whirlpool dishwashers indicates that the diverter position cannot be confirmed. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C1 display on many GE Appliances dishwashers indicates that the drain time exceeded the limit. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C2 display on many GE Appliances dishwashers indicates that the drain cycle is taking too long. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C3 display on many GE Appliances dishwashers indicates that the dishwasher is not draining. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C4 display on many GE Appliances dishwashers indicates that the dishwasher detected an overfill. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C5 display on many GE Appliances dishwashers indicates that the dishwasher did not receive enough water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C6 display on many GE Appliances dishwashers indicates that the water temperature is too low. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C7 display on many GE Appliances dishwashers indicates that the temperature sensor or heater is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The C8 display on many GE Appliances dishwashers indicates that the detergent dispenser did not open. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The H2O display on many GE Appliances dishwashers indicates that the dishwasher is not receiving water. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The PF display on many GE Appliances dishwashers indicates that power was interrupted. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 1H display on many GE Appliances dishwashers indicates that a delay-start period is active. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The 999 display on many GE Appliances dishwashers indicates that the control needs a reset or service check. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The FTD display on many GE Appliances dishwashers indicates that the dishwasher failed to drain in time. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The FQ display on many GE Appliances dishwashers indicates that the control detected an internal fault. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The LOC display on many GE Appliances dishwashers indicates that control lock is enabled. Codes can vary by model, so match the full model number to the official manual before ordering parts.
GE Appliances says the H2O Supply message on supported front-load washers appears when the machine cannot establish the expected water level. The official guidance specifically points to closed water valves or a pressure-sensor problem, with extremely low household water pressure as a less common cause.
The E22 display on many GE Appliances washing machines indicates that the washer did not fill in time. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E23 display on many GE Appliances washing machines indicates that the flood-protection system activated. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E30 display on many GE Appliances washing machines indicates that the washer cannot drain. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E31 display on many GE Appliances washing machines indicates that the drain time exceeded the limit. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E38 display on many GE Appliances washing machines indicates that the dispenser system is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E39 display on many GE Appliances washing machines indicates that the dispenser position cannot be confirmed. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E42 display on many GE Appliances washing machines indicates that the door-lock circuit cannot confirm a lock. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E43 display on many GE Appliances washing machines indicates that the control cannot unlock the door. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E45 display on many GE Appliances washing machines indicates that the door-switch signal is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E46 display on many GE Appliances washing machines indicates that the door-lock feedback is inconsistent. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E47 display on many GE Appliances washing machines indicates that the door-lock circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E48 display on many GE Appliances washing machines indicates that the door-lock position cannot be confirmed. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E49 display on many GE Appliances washing machines indicates that the door-lock circuit remains active. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E52 display on many GE Appliances washing machines indicates that the motor failed to rotate. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E53 display on many GE Appliances washing machines indicates that the motor-control circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E54 display on many GE Appliances washing machines indicates that the motor current is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E57 display on many GE Appliances washing machines indicates that the inverter detected a fault. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E58 display on many GE Appliances washing machines indicates that the motor current is too high. Codes can vary by model, so match the full model number to the official manual before ordering parts.
The E60 display on many GE Appliances washing machines indicates that the door-lock or control circuit is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.
A blocked filter or hose, a jammed pump, an installation problem, or incorrect cycle behavior can leave water in a washing machine after the cycle ends.
An unbalanced load, retained water, an unlocked door, a selected no-spin option, or a drive-system fault can prevent the final spin.
A loose hose connection, overflowing detergent, a blocked drain path, a damaged door seal, or an internal hose or pump leak can produce water under a washer.
A power issue, an open or unlocked door, control lock, delayed start, water-supply problem, or failed control component can keep a washer from beginning a cycle.
A washer door normally remains locked while water is present, the drum is moving, the machine is hot, or the control has not completed its release sequence.
An uneven load, incorrect leveling, transport bolts, a flexible floor, or worn suspension can cause excessive movement during high-speed spin.
Detergent residue, trapped moisture, low-temperature washing, a dirty gasket or filter, and a slow household drain can produce musty or sewage-like odors.
Closed valves, low pressure, kinked hoses, blocked inlet screens, a door-lock issue, or a failed inlet system can prevent a washer from filling.
A blocked filter, drain hose, air gap, disposer connection, or pump can leave dirty water in the bottom of a dishwasher.
Blocked spray arms, incorrect loading, low water temperature, weak filling, poor detergent use, or a circulation problem can leave food and film on dishes.
A door-seal issue, loose hose, excess foam, overfilling, or an internal pump and sump leak can put water under a dishwasher.
A power problem, unlatched door, control lock, delayed start, interrupted cycle, or failed switch or control can prevent a dishwasher from running.
Cycle selection, rinse aid, loading, plastic items, low final-rinse temperature, or a heating and ventilation fault can leave dishes wet.
Food debris, a dirty filter, standing water, poor drain-hose routing, or long periods with the door closed can cause musty, sour, or sewage-like odors.
A closed supply valve, kinked hose, door-latch issue, stuck float, blocked inlet path, or failed inlet valve can prevent a dishwasher from filling.
Debris in the filter or pump area, a spray arm striking dishes, a dry pump, or a worn circulation or drain component can create grinding or rattling sounds.
The 4C or 4E code indicates that the washer is not receiving enough water within the expected time.
Power reaches the refrigerator, but airflow, temperature control, condenser cooling, defrost, or compressor operation may be failing.
Bosch documentation for supported washers groups F29 with F17/E17 water-inlet faults: the tap may be partly closed, pressure may be too low, or the inlet filter/hose may be restricted. If your display truly reads E29, verify the complete model manual before assuming it has the same meaning.
Samsung 5d is a display variant of Sd or SUd on supported washers and means excessive suds were detected. The washer normally pauses and extends rinsing until foam falls, then continues automatically; 5E or 5C is a different drainage fault.
Whirlpool rL, F34, or F0E1 on supported front-load washers means the machine detected items in the drum while Clean Washer was selected. Remove every item, restart the empty cleaning cycle, and use one power reset only if rL returns with a confirmed empty drum.