DiagnoseSavedSearch
Error code guideE16 / F16

Bosch washer E16 / F16 error: the door is not closed or locked

Bosch washer E16 / F16 means the door is open or the control cannot confirm that it is properly closed. Bosch's user-level guidance is to close the door correctly and contact service if the code remains.

Model check required. Bosch identifies E16 / F16 as a door-open fault on supported washer families. Door-lock hardware differs by model, so confirm the E-number before replacing any latch or switch component.
Reviewed Sep 4, 20264 minute guideWashing machineSelected Bosch washing machine model families
Quick answer

Bosch washer E16 / F16 means the door is open or the control cannot confirm that it is properly closed. Bosch's user-level guidance is to close the door correctly and contact service if the code remains.

Start here: Open and close the door again. Check the opening, move laundry fully inside the drum, and close the door normally until it seats. Do not slam or force the latch.
Did this exact problem happen on your device?No review to write. Two clicks can turn your experience into useful data.
Guided check

Match the symptom, then work through the safe checks.

0/3 checked

1. What best matches what you observe?

2. Complete only the checks that are safe for you.

Leave latch-switch testing to serviceInternal door-lock, switch, wiring, and control diagnosis requires model-specific service procedures.Professional
3 user-level checks are available in this guide.Stop immediately if any warning condition applies.
Show stop conditions
  • E16 / F16 remains after the door is correctly closed
  • The latch, handle, or door alignment is visibly damaged
  • Internal door-lock or wiring testing would be required

Likely causes

  • The washer door is not fully closed
  • Laundry or a small item is trapped between the door and seal
  • The latch is not reaching the closed position
  • The door-closed signal is not being confirmed after the door is physically shut

Quick checks, in order

Open and close the door again

Check the opening, move laundry fully inside the drum, and close the door normally until it seats. Do not slam or force the latch.

safe

Inspect for trapped fabric

Look around the visible door seal and latch area for clothing, cords, or debris that can prevent full closure.

safe

Retry only after the door is fully closed

Bosch identifies E16 / F16 as a door-open condition. If the display remains after correct closure, stop repeated attempts.

safe

Leave latch-switch testing to service

Internal door-lock, switch, wiring, and control diagnosis requires model-specific service procedures.

Professional

Can the washer positively confirm the door is closed?

The code clears after reclosing the door

The door was not fully seated. Check that laundry is not pushing against the door before the next cycle.

The door looks closed but E16 / F16 remains

The latch position or door-closed feedback may not be confirming correctly. Arrange model-specific service rather than forcing the door.

The latch or handle is visibly damaged

Do not continue cycling the washer. A damaged safety interlock should be inspected before use.

Stop and get qualified help when

Do not continue troubleshooting if any of these apply:
  • E16 / F16 remains after the door is correctly closed
  • The latch, handle, or door alignment is visibly damaged
  • Internal door-lock or wiring testing would be required

Official support and model manuals

Use the full model number from the rating label. The manufacturer manual is the deciding reference when codes differ by region or product family.

Bosch Support — washer E16 / F16

Frequently asked questions

What does Bosch washer E16 / F16 mean?

Bosch defines E16 / F16 as a door-open condition. Close the door correctly; if the code remains, use Bosch service guidance for the exact model.

Should I force the door harder to clear E16 / F16?

No. Remove any obstruction and close it normally. Forcing a misaligned or damaged latch can make the fault worse.

Explore the problem space

Browse related code, device, and symptom hubs.

All Bosch washing machine codesWashing machines
Keep diagnosing

Related troubleshooting guides

View more →
Home appliances4 min
E17 / F17 / F29

Bosch washer F29 error

Bosch groups F29 with E17 and F17 on supported washers. It indicates that the water-supply filters or AquaStop hose may be restricted, or that household water pressure is too low for the washer to fill correctly.

BoschOpen guide
Home appliances4 min
E18 / F18

Bosch washer E18 / F18 error

The E18 / F18 display on many Bosch washing machines indicates that the washer cannot drain in time. Codes can vary by model, so match the full model number to the official manual before ordering parts.

BoschOpen guide
Home appliances4 min
E19 / F19

Bosch washer E19 / F19 error

The E19 / F19 display on many Bosch washing machines indicates that the water is taking too long to heat. Codes can vary by model, so match the full model number to the official manual before ordering parts.

BoschOpen guide
Home appliances4 min
E20 / F20

Bosch washer E20 / F20 error

The E20 / F20 display on many Bosch washing machines indicates that unexpected heating was detected. Codes can vary by model, so match the full model number to the official manual before ordering parts.

BoschOpen guide
Home appliances4 min
E23 / F23

Bosch washer E23 / F23 error

The E23 / F23 display on many Bosch washing machines indicates that AquaStop or leak protection is active. Codes can vary by model, so match the full model number to the official manual before ordering parts.

BoschOpen guide
Home appliances4 min
E25 / F25

Bosch washer E25 / F25 error

The E25 / F25 display on many Bosch washing machines indicates that the turbidity sensor is abnormal. Codes can vary by model, so match the full model number to the official manual before ordering parts.

BoschOpen guide