Match the symptom, then work through the safe checks.
1. What best matches what you observe?
2. Complete only the checks that are safe for you.
Show stop conditions
- Water reaches electrical parts
- The pump smells burned
- Internal disassembly is needed
Likely causes
- Drain hose is kinked or blocked
- Filter or sump contains debris
- Drain pump is jammed or not running
- Level sensing still detects retained water
Quick checks, in order
Run one drain attempt
Listen for the pump and note whether any water moves.
Inspect the drain hose
Straighten kinks and check the sink or standpipe connection.
Clean the user-accessible filter
Disconnect power and prepare for retained water.
Stop before pump or wiring work
Internal pump and control diagnosis requires service.
What happens when OE appears?
A blockage, jam, or restricted hose is likely.
The pump, wiring, control, or interlock may need diagnosis.
Check the filter, hose, sink connection, and installation height.
Stop and get qualified help when
- Water reaches electrical parts
- The pump smells burned
- Internal disassembly is needed
Official support and model manuals
Use the full model number from the rating label. The manufacturer manual is the deciding reference when codes differ by region or product family.
Frequently asked questions
What does OE mean on a LG dishwasher?
On many model families, OE indicates that the dishwasher cannot drain correctly. Confirm the exact model and region because the same display can be used differently.
Can I clear OE by unplugging the dishwasher?
A short power reset may clear a temporary state, but it will not fix a blocked hose, leak, failed sensor, motor, heater, or wiring fault. Stop if the code returns.
Should I replace a part based only on the code?
No. A code identifies a system or condition, not always the failed component. Complete safe external checks and use the model-specific manual or qualified service.