Match the symptom, then work through the safe checks.
1. What best matches what you observe?
2. Complete only the checks that are safe for you.
Show stop conditions
- The washer strikes cabinets, walks, or moves violently
- The drum appears loose, tilted, or makes metal impact sounds
- The machine cannot be leveled safely or internal suspension access is required
Likely causes
- One heavy item or a small load is concentrated on one side of the drum
- Large items have tangled or trapped smaller items
- The washer is not level or moves excessively during spin
- A repeated imbalance on balanced loads points to suspension or sensing problems
Quick checks, in order
Pause and redistribute the laundry
Separate tangled items and spread the load around the drum before restarting spin.
Mix large and small items
Avoid spinning one absorbent item alone; combine compatible items of different sizes.
Check that the washer is stable
Confirm all feet contact the floor and the cabinet does not rock.
Stop repeated high-impact spinning
Service is appropriate when balanced test loads still cause violent movement or repeated E32/F32.
When does E32 appear?
Redistribute the item or add compatible smaller items so the load can balance.
That is a protective response to imbalance; the washer may attempt redistribution several times.
Check leveling, then arrange suspension, drive, or imbalance-sensing diagnosis if it continues.
Stop and get qualified help when
- The washer strikes cabinets, walks, or moves violently
- The drum appears loose, tilted, or makes metal impact sounds
- The machine cannot be leveled safely or internal suspension access is required
Official support and model manuals
Use the full model number from the rating label. The manufacturer manual is the deciding reference when codes differ by region or product family.
Frequently asked questions
What does E32 mean on a Bosch washing machine?
E32 or F32 means the washer detected an imbalance and reduced or stopped spinning to protect the appliance.
Is Bosch E32 a motor fault?
Not normally. Start by redistributing the load and checking stability. Repeated E32 with balanced loads can justify service.
Why does the cycle take longer with E32?
The washer may make several attempts to redistribute the laundry before reducing or canceling the spin.